Counterflow V-JET 66m³/h, 400V, 2,2 kW, for liner, fittings and interconnection piping _D_ 63 mm
Category: Counterflow ID: 30122512
Contents of the set
Product information
Inbuilt counterflow system V-JET
This counterflow system is ready for an easy installation. It is possible
to regulate the jet strength and air suction on the nozzle of 40 mm in
diameter, which is directionaly adjustable. The nozzle, suction and
pneumatic switch are positioned in the front cover panel of the
equipment.
Complete counterflow system V-Jet includes:
• Counterflow nozzle 40 mm (regulation water – air)
• Front cover panel – attractive design
• Pool wall lead-through
• Pump – different performance
• Electropneumatic switch with safety element
• PVC fitting
Technical data:
Pressure switch for switch on and off
• Inside jet for water regulation
• Outside jet for air suction regulation
• By touring inside jet to left side we got maximal water flow
• By touring inside jet on the other side (right) we reduce the water flow
Downloads
- Manual - Counterflow V-jet - DE 1,204 kB Download
- Manual - Counterflow V-jet - HR 1,200 kB Download
- Pump for counter flow V-Jet 66, 74, 84m3 1,455 kB Download
- Counter flow V-Jet - front 1,488 kB Download
- Leaflet - Counterflow V-JET - CZ/EN/DE/RU 4,447 kB Download
- Protiproud V-jet CZ - Manual 1,131 kB Download
- Protiproud V-jet EN - Manual 988 kB Download
- Leaflet - Counterflow V-JET - CZ/EN/DE/RU 3,823 kB Download
PNEUMATIC SWITCH V-JET
PNEU HOSE V-JET
X SCREW FRONT V-JET M6X35
FRONT COVER PANEL V-JET
REAR COVER V-JET COUNTERFLOW
AIR REGULATOR
X JET GUIDE V-JET NOW IA033-6
WATER REGULATOR V-JET FRONT
FRNT COVER OF V-JET
X SCREW FRONT V-JET
BODY OF AIR ADAPTOR
O-RING 65X3
HOSE OF SUCTION OF AIR V-JET
X PASS HOSE V-JET
X SEAL HOSE PASS V-JET
X FLANGE SCREW V-JET
V-JET COUNTERFLOW FLANGE
FLANGE GASKET OF V-JET
SCREW DIN7982 4.8X25 PASS
CONCRETE PASS V-JET
BODY OF PUMP NEX BCC
X DRAIN SCREW NEWBCC ISP040008
X DRAIN SCREW NEWBCC-ISP040008
TURBINE NUT
TURBINE NEXBCC 3HP
TURBINE NEXBCC 4HP
TURBINE NEWBCC 5,5HP
Sealing Segment NBCC + BCC
BODY GASKET OF PUMP NEWBCC
FRONT OF PUMP NEXBCC
PLINTH FOR PUMP NEW BCC
NEW BCC BASE WITH SILENTBLOCK
SILENT BLOK 16x45x13
PUMP BODYBLINDNUT M.6 NEW BCC
WASHER M6
X MOTOR CLAMP NEWBCC
WASHER M6 NEWBCC
NUT M6
BREAKWATER WASHER 2-3 CV.
FRONT OF MOTOR 3HP
Bearing 6205 3HP
Washer M8 DIN 3HP
Washer M8 DIN9021 4/5,5HP
Allen screw M8x25 3HP
Allen screw M8x39 4/5,5HP
Nut M8 4HP
Rotor with shaft 1-PH 3HP
Rotor with shaft 3-PH 3HP
Stator 1-PH 3HP
Stator 3-PH 3HP
Capacitor 50 uF 3HP
COVER OF TERM.BLOCK NEWBCC
Ground conn.toothed washer M4 3HP
Ground conn.screw M4x6 3HP
CABLE CONNECTOR SET (M4)
Cable conn.fixing screw 3-PH 3HP
SPRING WASHER CONTRA
BACK COVER OF NEWBCC 3HP
Rod M6x195mm 3HP
BLOWER NEWBCC
Motor fan ring 3HP
COVER OF VENTIL.OF PUMP NEWBBC
SCREW M3 9X9.5 DIN7981
HOSE SLEEVE O-RING D. 75
FLANGE
X UNION NUT NEWBCC
MOTOR NEWBCC300 230V 3HP
MOTOR COMPLETE NEWBCC300
MOTOR NEWBCC400 400V 4HP
MOTOR NEW BCC 550T
Specifications
- Power consumption:
- 2,2 kW
- Voltage:
- 400 V
- Max. flow:
- 66 m3/h
- Connection:
- 63 mm